Commercial Printing, Binding, Finishing, Framing and Factory Equipment

Timed Online Auction – Starts May 8, 2024

Registration

ONLINE BIDDING ONLY. REGISTER AT:    

Bidding Schedule

BIDDING OPEN NOW!
BIDDING CLOSES STARTING AT:
11:00 A.M. EST on Wednesday, May 8, 2024

Inspection

By Appointment Only:
Contact Glen Shoniker at 416-558-8890,
or by email 
(2) Inspection Locations:

1. 100 Innovation Drive, Vaughan Ontario
2. 5703 Steeles Avenue West, North York, Ontario

ADVERTEK INC. is growing and diversifying!
Assets on offer are no longer required in their ongoing operations.

Featuring

PRINTING DEPARTMENT

• 2003 HEIDELBERG “SM 52-4+LX” 4-Colour Offset Printing Press, S/N: 206202, 14″ X 20″ Capacity, 86,910,982 Impressions, w/Tower Coater, Extended Delivery, Drystar Infra-Red Dryer, Technotrans Chiller, Grafix Powder Spray, Blanket & Roller Washer, Plate Bender (Vaughan Facility)
• 2002 HEIDELBERG “QM46-2″ 2-Colour Offset Printing Press, S/N: 964242, 12″ X 18” Capacity Auto Plate Loader (Vaughan Facility)
• HP “Scitex FB500″ Digital Flat Bed Printing Press, S/N: SG3BF31001, 64” Capacity, Material Feed & Discharge Tables (North York Facility)

FINISHING DEPARTMENT

• 2013 KONGSBERG “XN-24CS” Flatbed Digital Plotter/Cutter/Router, S/N: 84-0481, 68.5″ X 19′ Table, w/ESKO “Multi-Cut” Head, Chiller Unit, Vacuum Pump, Waste Paper Vacuum (North York Facility)
  See it in operation here
• (2) 2019 TECNAU “PageReady OL” Fully Automated Bi-Directional Slitters, w/Pile Feeders, Cut, Trim, Collate and Stack, S/N: 029124, 030311, 029121, 028864 and 028058, 029033, 028019, 027905, Up To 57,600 Pages/Hour (North York Facility)
• TECNAU Slitting Heads (North York Facility)
• 2003 POLAR “115 ED” Paper Cutter, S/N: 7331220, 45″ Capacity, Chromium Main Air Film Tables, Additional L & R Air Tables (Vaughan Facility)
• TEC LIGHTING “TC2421-1-11-A” UV Dispersion Coater/Conveyor/Dryer, S/N: CON-1100, 21″ Capacity, UV Dryer (North York Facility)
• 2007 HORAUF “SN-140” 3-Knife ECO-Trimmer, S/N: 047550, Additional Knives (North York Facility)
• “BU-1600ZD” Roll-to-Roll Double Sided Hot/Cold Laminator, 63″ Capacity (North York Facility)
• THERM-O-TYPE “Super-Quad 12” High Speed Slitter, S/N: 1401 (North York Facility)
• UCHIDA “VS-55” Paper Drill, S/N: 0107017 (North York Facility)
• CMC Kick-Type Round Cornering Machine, S/N: N/A (North York Facility)

BINDERY DEPARTMENT

• 2006 DUPLO “System 5000” Booklet Making System, S/N: 031000799, 060900820, 060501069, w/Stacking Unit, (3) 10-Pocket Collator Towers, (3) Hohner Heads, Folder & Face Trimming Modules, Additional Spare Parts (North York Facility)
• 2005 DUPLO “DC-645” Heavy Duty Slitter/Cutter/Creaser, S/N: 070553590, Up To 26 Sheets/Minute (North York Facility)
• 2009 GP2 TECHNOLOGIES “SC-2 AutoCase” Automatic Case Maker, S/N: SC2-00324, Up To 300 Cycles/Hour (North York Facility)
• GBC “STL-1000” Twin Loop Spool Wire Binding Machine, S/N: 7012-0100, Up To 1,000 Books/Hour (North York Facility)
• MORGANA “DigiCreaser-770820″ Creasing Machine, S/N: 7705830EAD, 24.8″ X 12.9” Max Sheet Size (North York Facility)
• 1990 MBO “T49-P” Pile Feed Paper Folder, S/N: EO6747, 4-Page Capacity (North York Facility)
• 2020 MARCELLO STRADA “Multi Press” Book Binding Machine, S/N: Multipress 03-20-112, w/Aligner Unit (North York Facility)
• 2005 BANTAM “BAN.1” Sheet Tabbing/Counting Machine, S/N: 539095 (North York Facility)
• INTERLAKE “S3A” Wire Stitcher, S/N: 6673 (North York Facility)
• BOSTITCH “7” Wire Stitcher, S/N: 772224 (North York Facility)
• DELUXE STITCHER “M17G8-AST” Twin Head Wire Stitcher, S/N: 04003M17 (North York Facility)
• 2006 SCHMEDT “Praleg HHS-1806” Casing-In Machine, S/N: 800 (North York Facility)
• AMERITEK “T-2000” Pressure Sensitive Tabber, S/N: 1007-140 (North York Facility)
• ODM Case Making System, S/N: N/A (North York Facility)

FRAMING DEPARTMENT

• 2000 OMGA “V235-NC-US” CNC Fixed Double Mitre Saw, S/N: 2.949, 14″ Blades, Hopper Loader (North York Facility)
• (2) DRYTAC CANADA “DES-1” Picture Frame Edge Foiling Machines, S/N: DES-1045, DES-1054 (North York Facility)
• DELTA “AP-400” Single Cylinder Dust Collector, 1 HP Motor (North York Facility)

FACTORY EQUIPMENT

• TOYOTA “42-6F-GCU15” Propane Powered Forklift Truck, S/N: 63047, 2,800LB Capacity, 3-Stage Mast, Side Shift (Vaughan Facility)
• 2003 RAYMOND “EASi- R40TT” Electric Powered Reach Truck, S/N: EZ-D-03-29115, 4,500LB Capacity, 300” Lift, 24” Reach, w/Battery Charger, (Vaughan Facility)
• 2012 DV SYSTEMS “G-30TD” Rotary Screw Air Compressor, S/N: 37993, 30 HP Capacity, w/DV “ASD-100” Refrigerated Air Dryer (Vaughan Facility)
• 1999 DEV AIR “VAT-5062MH” Tank Mounted Air Compressor, S/N: 39262, 10 HP Capacity (North York Facility)
• 1990 RANGER “402SAH120-10” Tank Mounted Air Compressor, S/N: SIL-0790-2332, 10 HP Capacity, w/Refrigerated Air Dryer (Vaughan Facility)
• 2013 DV SYSTEMS “IS5-5580-69” Tank Mounted Air Compressor, S/N: 71799, 5 HP Capacity (North York Facility)
• TECHQAIR Tank Mounted Air Compressor, S/N: N/A, 5 HP Capacity (Vaughan Facility)
• 2000 KAESER “TC-36” Refrigerated Air Dryer, S/N: 1099 (North York Facility)
• COMPAIR Refrigerated Air Dryer, S/N: N/A
• 1999 BENISON “LSA-504C” Automatic Heat Shrink Packaging Machine, S/N: 99514047 (North York Facility)
• 2007 MINIPAK-TORRE “MEDIA” Heat Shrink Packaging Machine, S/N: MF17BH12/000931, NOT OPERATIONAL (Vaughan Facility)
• 1991 RBS “ACT” Heat Shrink Packaging Machine, S/N: 91-0124 (Vaughan Facility)
• Heavy Duty STEEL MEZZANINE 35′ X 15′ X 10′ High, Steel Deck, Wood Floor (North York Facility)
• (2) ULINE “H-2079” Poly Strapping Units, S/N: 1603228667 and 1603228672 (North York Facility)
• POWER FIST Hydraulic Lift Scissor Cart, 300kg Capacity (North York Facility)

MISCELLANEOUS

• BUSY BEE “DF-1240G” Gap Bed Bench Type Tool Room Lathe, S/N: N/A, 12″ Swing, 40″ Centers, Inch & Metric Threading, 3 & 4-Jaw Chucks, Steady & Follow Rests, Face & Back Plates (North York Facility)
• GARLAND “TE-4” Electric Convection Oven, S/N: 40634 (North York Facility)
  
  

PLEASE NOTE
All removals will be by appointment only.